If you have a lot of gear and need to get it around easily, the Nanuk 960 is perfect for you. With plenty of interior space and built-in polyurethane corner wheels, this case is a transportation superstar. Waterproof, dustproof, and impact resistant, this case will keep your equipment safe in any condition.
Made in Canada by Plasticase
Temperature range of -29C and 60C
Powerclaw Latching System clamps the case tightly closed and keeps it closed until you want it open.
IP67 Waterproof rating means this case keeps water out for 30 minutes at a depth of 3 feet.
NK-7 is impact resistant and resists cracking.
Built-in pressure equalization valve.
Two strong polyurethane corner wheels.
2 stage retractable pull handle means transportation in comfort.
Reinforced metal padlock hasps to keep your gear protected.
Pull out the hinge pin to make your lid removable.
Bezel in the base and lid interior means you can install a panel kit in a flash.
Easily install an optional shoulder strap.
Soft rubber over-molded handles with integrated stays keep the handle folded down to avoid damage during transport.
Interior (LxWxH)22 × 17 × 12.9”
559 x 432 x 328 mm
Exterior (LxWxH)25.4 × 20 × 14.5”
645 x 508 x 368 mm
- Lid Depth2.1″ | 53 mm
- Base Depth10.8″ | 274 mm
- Internal Volume2.79 cu.ft (79.0 L))
- Weight (empty)19.2 lb | 8.7 kg
- Temperature RangeMin -20°F (-29°C ) | Max 140°F (60°C)
- MaterialLightweight NK-7 resin
- Max buoyancy167.6 lb | 76 kg
- Padlock Holes Diameter0.340"
- Handle height from ground33" | 38.5"
- Airline carry-onNo*